From 398608948fa730883d234a636cb33f73f2da51cf Mon Sep 17 00:00:00 2001
From: Mel <mel@rnrd.eu>
Date: Mon, 13 Jul 2026 19:59:37 +0200
Subject: Add device trees for MHS3.5 SPI devices

Signed-off-by: Mel <mel@rnrd.eu>
---
 dts/mhs35-touch-overlay.dts | 91 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 dts/mhs35-touch-overlay.dts

(limited to 'dts/mhs35-touch-overlay.dts')

diff --git a/dts/mhs35-touch-overlay.dts b/dts/mhs35-touch-overlay.dts
new file mode 100644
index 0000000..3b1c256
--- /dev/null
+++ b/dts/mhs35-touch-overlay.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * device tree overlay for the mhs-3.5 ads7846 resistive touch controller.
+ *
+ * fits in with `./mhs35-overlay.dts`!
+ *
+ * Copyright (c) 2026 Mel G. <mel@rnrd.eu>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2711";
+
+	fragment@0 {
+		target = <&spi0>;
+
+		__overlay__ {
+			status = "okay";
+
+			spidev@1 {
+				status = "disabled";
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&gpio>;
+
+		__overlay__ {
+			mhs35_touch_pins: mhs35_touch_pins@0 {
+				brcm,pins = <17>; // pen-irq
+				brcm,function = <0>; // in
+				brcm,pull = <2>; // up
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&spi0>;
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mhs35_touch: ads7846@1 {
+				compatible = "ti,ads7846";
+				reg = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&mhs35_touch_pins>;
+
+				// adc should run at 2mhz as specced, anything
+				// slower makes reading drift and drag weirdly!
+				spi-max-frequency = <2000000>;
+				interrupts = <17 2>; // falling edge
+				interrupt-parent = <&gpio>;
+				pendown-gpio = <&gpio 17 1>; // pen-irq, check pins!
+
+				// these values try to supress garbage data on press,
+				// without these, clicks are weird and unreliable!
+				ti,keep-vref-on;
+				ti,settle-delay-usec = /bits/ 16 <150>;
+				ti,debounce-max = /bits/ 16 <10>;
+				ti,debounce-tol = /bits/ 16 <30>;
+				ti,debounce-rep = /bits/ 16 <1>;
+
+				// NOTE(mel): these values do *not* calibrate the screenspace
+				// coordination in accordance with the rotation by themselves!
+				// the exact matrices are set via libinput in userspace.
+				// see: `module.nix`
+				ti,x-min = /bits/ 16 <200>;
+				ti,y-min = /bits/ 16 <200>;
+				ti,x-max = /bits/ 16 <3900>;
+				ti,y-max = /bits/ 16 <3900>;
+				// some basic pressure values provided by goodtft,
+				// could be tuned maybe.
+				ti,pressure-min = /bits/ 16 <0>;
+				ti,pressure-max = /bits/ 16 <255>;
+				ti,x-plate-ohms = /bits/ 16 <150>;
+			};
+		};
+	};
+
+	__overrides__ {
+		touch_speed =  <&mhs35_touch>,"spi-max-frequency:0";
+		touch_penirq = <&mhs35_touch_pins>,"brcm,pins:0",
+			       <&mhs35_touch>,"interrupts:0",
+			       <&mhs35_touch>,"pendown-gpio:4";
+	};
+};
-- 
cgit 1.4.1